{"product_id":"griffon-poly-max-montagelijm-high-tack-express-wit-435g-6303764","title":"Poly Max Assembly Glue High Tack Express White 435g - 6303764","description":"\u003cp\u003e \u003cstrong\u003eSUITABLE FOR:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e For gluing and mounting many building materials on almost all surfaces, such as wood, (natural) stone, (aerated) concrete, metal, hard foam and various plastics. Suitable for indoor and outdoor applications, such as panels, ceiling elements, fascias, plasterboard, plate and insulation materials, mirrors, battens, skirting boards and laths. For all professional applications, such as facade and interior construction, residential, utility and bodywork construction.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eNOT SUITABLE FOR:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eNot suitable for PE, PP, PTFE, pure plaster, and bitumen. When gluing plastic, always carry out an adhesion test first. The adhesion to plastic can vary depending on the type of plastic and the quality of the plastic.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eFeatures and strengths\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e Very high initial tack\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Very fast strength build-up\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Permanently elastic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Very good filling capacity\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Good stance\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e non-shrink; 100% glue\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Solvent-free\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e No edge zone pollution\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Weather resistant\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Temperature resistant from -40°C to +100°C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Paintable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Hardening approx. 2 mm\/24 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eFOR USE:\u003c\/strong\u003e\u003cbr\u003e Processing conditions\u003cbr data-mce-fragment=\"1\"\u003e The temperature of the environment, the adhesive and the materials to be glued must not fall below +5°C.\u003cbr\u003e\u003cbr\u003e Surface requirements\u003cbr\u003e Parts must be clean, free of dust and grease. Provide a solid surface. Substrate may be slightly damp. No need to use primer.\u003cbr\u003e\u003cbr\u003e Tools\u003cbr\u003e Caulking gun and rubber mallet.\u003cbr\u003e\u003cbr\u003e Preparation product \u003cbr\u003eBefore use, open the tube at the top by cutting off the plastic nipple above the screw thread with a sharp knife. Then attach the nozzle and cut it at an angle (opening min. Ï 5 mm).\u003cbr\u003e\u003cbr\u003e Consumption\u003cbr\u003e 1 tube produces approx. 7-9 meters of glue.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eWHEN USING:\u003c\/strong\u003e\u003cbr\u003e Dealing with packaging\u003cbr\u003e Process only with the special supplied nozzle.\u003cbr\u003e\u003cbr\u003e Instructions\u003cbr\u003e Apply glue evenly, depending on the weight of the material, every 10 to 40 cm in vertical stripes or dots. Always apply glue to corners and along edges. Interaction of materials (façade panels) can be compensated by a glue thickness of 3 mm (use spacers or tape). Mount materials immediately with a sliding movement and press or tap firmly. Correction is still possible. Close the tube properly immediately after use.\u003cbr\u003e\u003cbr\u003e Points of attention \u003cbr\u003eThe drying times below are based on the bonding of at least one porous material and an adhesive layer with a thickness of approx. 1 mm. Considerably longer drying times must be taken into account when bonding two non-porous materials and\/or a thicker adhesive layer.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAFTER USE:\u003c\/strong\u003e\u003cbr\u003e Stains\/residue\u003cbr\u003e Remove wet adhesive residue immediately with turpentine. Dried glue residues can only be removed mechanically.\u003cbr\u003e\u003cbr\u003e Storage conditions\u003cbr\u003e Store dry in closed packaging between +5°C and +25°C.\u003cbr\u003e\u003c\/p\u003e","brand":"Griffon","offers":[{"title":"Default Title","offer_id":41311271190696,"sku":"6303764","price":6.39,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0511\/6015\/4280\/products\/groffon-high-tack-6303764_16282513196338.png?v=1634121737","url":"https:\/\/mastertools-stage.myshopify.com\/en-de\/products\/griffon-poly-max-montagelijm-high-tack-express-wit-435g-6303764","provider":"Mastertools - STAGE","version":"1.0","type":"link"}