D25614K Combi hammer SDS Max 1350W with UTC Anti-rotation System

• Ideal for drilling anchor, fixing and through holes from 12 to 45mm in concrete and masonry. Box drilling up to 100mm
• Rotation stop for light demolition work
• The unique dust seal prevents the finest dust from entering the mechanism, increasing the durability and life of the machine
• Increased durability and efficiency due to the chain drive and oil-filled gearbox for adequate lubrication of the parts and excellent heat dissipation
• The hammer mechanism has been optimized by a reduced number of parts and improved impact damping. This maximizes the impact force and allows efficient drilling in the hardest concrete
• The efficient recoil damping mechanism transfers the impact energy directly to the drill or chisel without loss due to excessive vibration and reduces the mechanical stress on the machine
• Ergonomic and compact, slim design for greater control and easy working in confined spaces
• The soft rubber coating of the handle reduces the transfer of vibration to the hands for less fatigue during extended use
• Electronically adjustable speed and impact energy adjustment for total control when drilling small diameters and lighter materials
• Switch lock for chiseling work
• Electronic carbon brush wear indicator indicates that the carbon brushes need to be replaced and the machine needs to be serviced
• Excellent power-to-weight ratio: 8 joules of impact energy delivered by a 6.9 kilo hammer
• Magnesium housing for reduced weight and excellent durability
• Thanks to the AVC system, vibrations are greatly reduced, so that you can work comfortably for longer per working day
• The UTC electronic anti-rotation system detects when the machine continues to spin if it were to jam in the material The machine then virtually stops to protect the operator

Technical data

• Power Supply: Corded
• Power Consumption: 1350 W
• Bitholder: SDS-Max
• Anti-Rotation System: Yes
• Rotation Mode Only: No
• Clutch: Yes
• Perform And Protect: Yes
• Beats per Minute: 1450-2900 bpm
• No-load Speed: 190-380 rpm
• max. Drilling capacity (Concrete): 45.0 mm
• max. Drill Capacity (Drill Bit): 125.0 mm
• max. Impact energy (EPTA 05/2009): 10.5 Joules
• Vibration Control: Yes
• Machining Mode: Yes
• Dust Solution Compatible: Yes
• Quick Change Chuck: No
• Hammer drilling mode: Yes
• Width: 112.0mm
• Length: 521.0mm
• Height: 293.0mm
• Weight: 7.8 kg

Sound and vibration values

• Sound pressure: 93.0 dB(A)
• Sound Power: 104.0 dB(A)
• Hand/Arm Vibration - Chiseling: 9.0 m/s²
• Hand/Arm Vibration Impact Drilling In Concrete: 8.9 m/s²
• Measurement uncertainty K 1 (Noise): 3.0 db(A)
• Measurement uncertainty K 1 (Vibration): 1.5 m/s²
• Measurement uncertainty K 2 (Noise): 3.0 db(A)
• Measurement uncertainty K 2 (Vibration): 1.5 mm