Milwaukee Hole Dozer™ Hole Saws - Unsurpassed Cutting Performance! Hole Dozer Hole saw - 102 mm - 1 pc - 49560213

Milwaukee Hole Dozer™ Hole Saws - Unsurpassed Cutting Performance! Hole Dozer Hole saw - 102 mm - 1 pc - 49560213

Special characteristics:

• Right-hand cutting angle for maximum productivity.
• Tooth design. Variable 4/6 teeth per inch tooth design with a positive 10° tooth angle offers the following benefits: - Faster and more aggressive cut. - Improved heat dispersion during cutting ensures teeth stay sharper longer. - Deeper, curved tooth cavities provide more efficient material removal, preventing clogging and heat build-up. - Specially shaped tooth angle has less tendency to bind in thinner materials. - Teeth alternate sideways to minimize clogging and friction. - Low feed pressure – this is achieved through the combination of aggressive tooth geometry and good material removal, reducing the pressure required when drilling.
• Tooth Material - Matrix II premium high speed steel is used for the teeth of the hole saw. Matrix II steel contains 8% cobalt so that the teeth retain their original hardness. Even at high temperatures that occur in metal cutting applications, for example. -Bi-metal construction - quality steel teeth are laser welded to a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600°C to give them maximum durability and service life. - Thanks to the high wear resistance of the Matrix II steel, the hole saws are ideal for cutting difficult and hard materials such as stainless steel, but also for softer materials such as wood.
• Holesaw body - The 1.27 mm thick steel body of the holesaw is rigid enough to hold its shape, but of course also has plenty of built-in elasticity.
• Hole saw bottom plate - The hole saw bottom plate is made of thick steel. This ensures shape retention even after intensive use. - Perfectly produced round bottom plates, important for large diameter hole saws.
• Diagonal slots help remove the drilled material.
• Applications - Manufacturing techniques performed according to the highest quality standards ensure high concentricity. Therefore, these hole saws are suitable for both hand and column drilling (manual feed only).
• This series of hole saws is the perfect solution for cutting a wide variety of materials: – Steel with a tensile strength of up to 1000 N/mm2. – Stainless steel and acid resistant steel. – Non-ferrous metals. - Cast iron. - Aluminium. - Wood. – Fiberboard (MDF). - Plasterboard. – Sandwich materials. – PVC.