Makita DJN161Z Nibbler 18V Loose Body

Makita DK0052G Angle Grinder Set

Scope of supply

• 1 piece Makita GA9020R angle grinder 230mm
• 1 piece Makita 9558NBR angle grinder 125mm
• 2 protective caps: 1x for 230mm and 1x for 125mm
• 2 pieces recording flange
• 2 pcs tension nut
• 2 pcs side handle
• 1 pcs cam wrench

Features and strengths Makita GA9020R

• Equipped with restart protection. LED indicates the status of the machine.
• Optimal protection against dust thanks to labyrinth seals and dustproof switch.
• The gear housing can be rotated 360° in 4 steps for optimum operation.
• Lower motor temperature under load and therefore more durable.
• Three position adjustable side handle.
• Well protected switch from dust and therefore more durable.
• The anchor is better protected against dust by the zig-zag coating and the field is better protected against dust by the powder-coated varnish and therefore more durable.
• Large rubber machine rest protects workpiece from scratches.

Features and strengths Makita 9558NBR

• Dust protection armature, field and bearings by labyrinth seal.
• Dustproof switch with long service life.
• Maximum service life due to extra coated armature and field windings against penetrating grit.
• Small, handy 125 mm sharpener.
• The gear housing can be rotated 360° in 4 steps.
• Low noise level.

Technical data Makita GA9020R

• Platform: 230 V
• Disc diameter: 230mm
• No-load speed: 6600 min-1
• Switch type: Hold switch
• Restart protection: yes
• Shaft lock: yes
• Connection/recording: M14x2
• Axle hole disc: 22.23 mm
• Volts (voltage): 230 V
• Power consumption: 2200 watts
• Soft start: yes
• Dim. LxWxH: 473x249x140 mm
• Cable length: 2.5 m
• Weight (EPTA): 5.8 kg
• Sound pressure level (LpA): 90 dB(A)
• Uncertainty (K) (LpA): 3 dB(A)
• Vibration ah surface grinding: 6.0 m/s²
• Vibration (K) surface grinding: 1.5 m/s²
• Vibration ah sanding: 2.5 m/s²
• Vibration (K) sanding: 1.5 m/s²

Technical data Makita 9558NBR

• Platform: 230 V
• Disc diameter: 125mm
• No-load speed: 11000 min-1
• Switch type: Hold switch
• Shaft lock: yes
• Connection/recording: M14x2
• Axle hole disc: 22.23 mm
• Volts (voltage): 230 V
• Power consumption: 840 watts
• Dim. LxWxH: 271x140x106 mm
• Cable length: 2.5 m
• Weight (EPTA): 2.1 kg
• Sound pressure level (LpA): 86 dB(A)
• Uncertainty (K) (LpA): 3 dB(A)
• Vibration ah surface grinding: 8.5 m/s²
• Vibration (K) surface grinding: 1.5 m/s²
• Vibration ah sanding: 2.5 m/s²
• Vibration (K) sanding: 1.5 m/s²