Arbortech AS175 All purpose saw 1400W incl. 2 saw blades - 900550

Arbortech AS175 All purpose saw incl. 2 saw blades

Scope of supply

• 2 pcs Universal knife 150G (set 2 pcs.)
• 2 pcs Insert knife 150P (set 2 pcs.)
• 1 pcs Adapter
• Supplied in an Arbortech carrying case

Characteristics

• The patented sawing movements of the two carbide saw blades of the Arbortech AS175 ensure that almost anything is possible.
• Jobs that were previously considered impossible or very difficult are solved in an instant by this machine.
• The Arbortech sawing machine is suitable for e.g. making slots in a wall, knocking out facades, removing bricks from the wall, etc.
• Blunt saw blade? No problem, Arbortech saw blades can be resharpened.
• The AS175 is supplied with three different saw blades and is suitable for various materials ranging from bricks, joints, sand-lime brick and aerated concrete
• This machine cuts masonry etc. dry with significantly less respirable dust than an angle grinder.
• With dust extraction, this machine remains well below the particulate matter standard as it is currently set. So healthier for the employee.
• Because virtually no dust is thrown into the air, you keep a good view of your work, which also benefits the safety and accuracy of your work.
• You can cut square or rectangular holes with this machine without the saw cuts crossing each other in the corners, so less finishing work.
• You can cut no less than 120mm deep with this machine, which means that you can remove a single stone from a facade. This is, for example, to check the insulation and to be able to place this stone back.

Technical data

• Cutting width 6.35 mm/7.2 mm depending on type of saw blades
• Weight with saw blades 4.3kg (9.5lb)
• Dimensions without saw blades
• (L): 345mm (13 1/2") (W): 75mm (3") (H): 210mm (8 1/4")
• Noise level: 108 dB
• No-load speed 5,100rpm
• Electrical rating, nominal 230 VAC, 50 Hz (Europe)
• Dust extraction coupler diameter 30mm ID, EN 60335-2-69
• Belt tension 1 mm (1/16") maximum medium tension
• Deflection width 25 N (2.5 kg) (8lb) deflection force
• blade mounting tension 16 Nm (1.6 kg-m), (11.5 ft-lb), unlubricated
• CE Approval EN 60745EN 50144 2-11:1997